This is a well balanced blend of corrosion inhibitors , and surface active highly emulsified acidic materials product for the cleaning of aluminium, copper and removal of rust stains on paint work.

Do not eat, drink or smoke while handling it; wash carefully with soap and water before meals and after work shift as shower is recommended.

R 34    : Causes burns.
S 26    : On contact with eyes,Wash eye ball immediately with plenty of water and seek medical advice.

Refer this link for complete set of HOLD CLEANING KIT  ::: http://rxmarine.com/Ship-hold-cleaning-kit-set-supplier

SLIPcoat supplier in Sohar Muscat Oman, Fujairah Dubai UAE

Undiluted : In cases where we deal with heavy deposit build–up, CEMENT REMOVER must be applied undiluted.
Diluted : In cases of light deposition, on large surface areas, a solution between 10–40% may be used.

METHOD ::: 
1.For heavy deposition and thick layers  of cement, a concentrated and  stronger cleaner will be necessary to cut through the layers of cement.
2.Use a scraper, metal scrubber or flat head screwdriver to remove as much of the cement as possible.
3.For the remaining cement, apply this chemical 
4.Once the cement loosens, scrub the area with a scrubber until it is all removed from the surface.
5.Rinse the area well with clean water.
6.Clean the area with alkaline soap and water 
7.Flush system completely.

It is highly concentrated and powerful penetrating agents materials which is effectively react with cement to loosen the bonding strength . Best results can obtain on dry surface of cement.  RXSOL'S R & D  has developed this molecular cement dissolver as an alternative to using hazardous acids for concrete removal. Back-Set is a one-of-a-kind formula. It uses an active ingredient found in sugar cane syrup, and is completely biodegradable.

RXSOL-22-2202-025 turned this vulnerability into an opportunity. "Back-Set" safely removes hardened concrete from a variety of difficult to clean surfaces. It break down the ionic bond in portland cement, releasing the cement from any surface to which it has adhered.

Citric Acid is a water treatment chemical used as pH control and for the removal of iron and other elements from fouled water softeners. Removes hard water built up, scale and lime. Citric Acid 50% Solution is used as a preservative, acidifier, chelator, and flavoring in various sections of the food and beverage industry.

PRODUCT SAFETY INFORMATION Keep containers tightly closed when not in use. Avoid contact with skin, eyes, and clothing. Avoid breathing vapors or mists. Remove contaminated clothing and wash thoroughly after handling. Hand protection: Use of gloves impermeable to the specific material handled, if necessary Eye protection: Chemical goggles or safety glasses. Face shield, if necessary Respiratory protection: Wear a NIOSH approved or equivalent dust respirator, if necessary DOT CODE GHS CODE Acute Toxicity, Dermal Category 5 Skin Irritation Category 3 Eye Irritation Category 2A HMIS CODE N/A

PHYSICAL PROPERTIES INFORMATION Physical state: Liquid Color: Clear colorless liquid Odor: Odorless pH: 2.2 (0.1 N sol) Specific Gravity: 1.24 – 1.26 STORAGE INFORMATION Keep container(s) tightly closed. Store this material in cool, dry, well ventilated areas. Protect container(s) against physical damage. Containers of this material may be hazardous when empty since they retain product residues (vapors, liquid). Shelf life: Stored under controlled conditions 1 year.

DELIVERY Containers: 55 Gal Plastic drums / 250 Gal Tote bin / Bulk tank trucks. NOTE Refer to the SDS for further health, safety and environmental information regarding this product. Information and recommendations in this technical data sheet are based on information believed to be reliable. However, the use of the product is beyond our control, and no guarantee expressed or implied is made as to the effects of such the results to be obtained id not used in accordance with directions or established safe practice. The buyer must assume all responsibility including injury or damage, resulting from misuse of the product as such, or combination with other materials. Issue date: March 1, 2016